Why the Concorde is an engineering marvel

On March 2, 1969, the legendary Concorde took to the air for the first time.

This aircraft with an iconic design was able to deliver performances that were far ahead of its time.

How fast was the Concorde? With a take-off speed of approximately 400 km/h and a cruise speed of approximately 2,150 km/h (about twice as fast as normal passenger aircraft today), the Concorde could fly from London to New York in just under three and a half hours. Other aircraft then needed an average of about eight hours to do this.

The Concorde in 1967 during its maiden flight, over Paris. Photo courtesy: Photos Airbus Heritage France

In the past we have already used some of the following with LEGOĀ® IconsĀ most impressive technical feats in the worldĀ celebrated, so we thought it was high time to also put the world's most famous passenger plane in the spotlight.

With the LEGOĀ® Icons Concorde soon to take to the skies, we asked senior designer Milan Madge what makes this aircraft so unique.

Built for speed

ā€œThere are many reasons why the Concorde is a special aircraft,ā€ said Milan. Even if you're not aware of the technology behind it, you're undoubtedly familiar with the sleek, streamlined silhouette that immediately stands out. It is a real design icon."

Despite its unique look, the Concorde's original design was not about form but about performance. And for the engineers that meant only one thing: speed.

"The four enormous Olympus engines under the wings ensure this," Milan continues. "All the different air inlets and outlets are also present in the LEGO set."

1977 photo of the air intake of Concorde 212. Photo courtesy: Photos Airbus Heritage France

To reach supersonic speeds, you need an incredibly sleek aircraft. And to be able to land with such a streamlined aircraft, the hanging nose was invented.

Reconstructing an icon

Milan explains that even the droopy toe was a functional decision.

"If the landing is initiated with a straight nose, the pilots cannot see the runway due to the length of the nose and the sharp approach angle. Therefore, the nose is tiltable."

The Concorde during a test flight in November 1970. The drooping nose is clearly visible. Photo courtesy: Photos Airbus Heritage France

And when you think of the Concorde, you immediately think of its iconic wings.

This shape is called a delta wing, after the Greek letter delta (Ī”).

ā€œWe spent a lot of time on the wing,ā€ says Milan. "The entire center section of the plane is built sideways, so the studs on the bricks are not in their usual orientation. This gave us the opportunity to create a very solid wing and give the LEGO model a smooth underside."

It is important because the bottom of the model is visible when it is on the display stand.

Milan and his team paid almost as much attention to their design as the engineers of the real Concorde, including the standard.

"We wanted the stand to give the impression that the Concorde is weightless. That is why we opted for a thin, slightly curved stand and a newly designed nameplate with a brass look."

Because the wing is so thin, it was also a challenge to integrate the landing gear.

"We wanted to give the model landing gear, but the frame turned out to be thicker than the wing."

Fortunately, Milan's experience ā€“ he also designed the LEGO NASA Space Shuttle Discovery, another technical tour de force ā€“ came in handy here.

"The experience I gained designing the Space Shuttle helped a lot. For Concorde, we wanted a mechanism that could both lower and retract the landing gear."

For this, Milan and his team had to design a structure that is almost as long as the set (approx. 105 cm) and that can lower the three landing gears at different speeds. All this had to fit in the very narrow hull, without hindering the interior.

The interior of the LEGO Icons Concorde.
Inside the real Concorde. Photo courtesy: Photos Airbus Heritage France

When we asked Milan how they succeeded, he had to laugh.

"With a lot of trial and error!"

We won't reveal any more, because you have to build this model to believe it. The dimensions of this set (approx. 105 cm long and approx. 43 cm wide) alone say enough. In fact, the LEGO Icons Concorde is so technical that we added it to our list ofĀ most challenging sets for adults.

The fastest in your LEGOĀ® collection

Milan and his team have designed dozens of variations of the model, often with the help of the Airbus Heritage Team, which has access to all Concorde archives.

Together they created a faithful model with a tilting drooping nose, working landing gear, a retractable tailwheel and delta wings with movable elevons or hinged upper and lower rudders.

Whether you are fascinated by the Concorde or are just a fan of beautiful design, this supersonic new set is a real must-have.

AIRBUS and CONCORDE are registered trademarks of Airbus.

LATEST LEGO SETS

SELECTED FOR YOU

1 3